Loading ...
Loading ...
Loading ...
( sing and Caring for
Your Oven
This section tells you, step by step, how to operate all oven functions controlled by the elec-
tronic controls. Carefully follow these instructions, along with the cooking tips and cleaning
information, for successful use of your range.
UsiB9 the electronic oven control
Display/clock
• When you first plug in the range, every-
thing on the display will light up for 1 to 2
seconds, then a time of day and "PF" will
appear on the display. Press OFF to clear
"PF" from the display. If, after you set the
clock, "PF" again appears on the the
display, your electricity was off for a while.
Reset the clock if needed. (See "Setting
the Clock" in the "Using and Caring for
Your Oven" section.)
• When you are not using the oven, the
control is an accurate clock.
• When you are using the oven or minute
timer, the display will show times, tempera-
ture settings, and what command buttons
have been pressed.
• When showing the time of day, the display
will show the hour and minutes.
• When you are using the minute timer, the
display will show minutes and seconds in
the following sequence :
- For settings from 1-59 minutes, the
display will count down each second.
- For settings 1 hour or over, the display
will count down hours and minutes.
• When you are using COOK TIME and/or
_ _ STOPTIMEthe
display will show hours
and minutes or
minutes and seconds.
18
Using the control lock
The control lock lets you shut down the
control panel command buttons. The control
lock comes in handy when you want to
prevent others from using the oven.
NOTES:
• You can only use the control lock when the
oven is not in use or the control has not
been set.
• Set the control lock when cleaning the
control panel to prevent yourself from
accidentally turning on the oven.
• The control lock will stay on even after a
power failure.
To lock or shut down the control panel :
Press and hold START for 5 seconds.
You will hear a single tone and "Loc" and
will appear on the display.
When the control is locked, 3
tones will sound if you press
any command button other
than CLOCK or TIMER SET.
To unlock the control panel :
Press and hold START for 5 seconds.
You will hear 3 tones followed by a single
tone. "Loc" and _ will
disappear from the temperature
display.
Loading ...
Loading ...
Loading ...