Loading ...
Loading ...
Loading ...
59
DRYER OPERATING INSTRUCTIONS
STEPS
TIPS IMPORTANT
4. Select the
appropriate
cycle and
settings for
each load.
• See
Cycle Selection
and
Cycle Settings
for
detailed descriptions of cycle controls.
• See
Cycle Setting Charts
to determine which
settings are available for each cycle.
• To provide the best care, not every setting
or option is available with every cycle. If a
setting or option is not available for the cycle
selected, the indicator will not light. See
Setting
Chart
for information of available options for
each cycle by model.
• Adjustments made to most cycle settings will
be remembered each time the cycle is selected
in the future. When the dryer is powered on, the
default cycle will be the normal cycle. Select
your desired cycle and previous settings will
remain. To return to factory settings, press the
dry level button and the dry time button at the
same time and hold until the signal sounds. See
Dryer Controls and Settings.
Over-drying can
cause wrinkles,
shrinkage, lint,
harshness, and a
build up of static
electricity.
To prevent
unintentional
and accidental
exposure of
delicate material
to excess heat
or unexpected
steam, the sanitize
temperature
setting and the
perfect steam™
option will not be
remembered and
must be reselected
each time.
5. Close the
dryer door
and start the
drying cycle.
• To start the drying cycle, close the door and
press the start/pause button.
• To add an item to the dryer drum, press start/
pause. Add the item, close the door and press
start/pause to resume the cycle.
• To change settings or options after the cycle
has begun, press start/pause, change the
settings, and then press start/pause. If the cycle
is not paused first, the unit will emit several
beeps when the buttons are pressed but no
changes to the cycle will be applied.
• To change the cycle once the cycle has begun,
press cancel to cancel the cycle, select the
new cycle, and press start/pause to begin the
new cycle. Changing a cycle selection without
canceling the current WILL NOT change the
cycle.
• To cancel a cycle, press cancel.
The dryer will not
operate with the
door open.
When drying a
single large or
bulky item, such
as a comforter,
pause the cycle
part way through
to turn the item
“inside out” and
maximize drying
effectiveness.
6. Remove
items when
done.
• A signal will sound at the end of the cycle if the
chime option is not set to mute.
• Immediately remove items when the cycle is
completed and hang or fold.
See product
manufacturer’s
instructions.
7. Clean the lint
filter.
• See Care and Cleaning section of this
instruction.
• CLEAN LINT will be displayed at the end of the
cycle as a reminder to remove lint from filter.
ALWAYS REMOVE
LINT at the end
of the cycle
(see warning on
previous page).
Loading ...
Loading ...
Loading ...