Loading ...
Loading ...
Loading ...
58
DRYER OPERATING INSTRUCTIONS
STEPS
TIPS IMPORTANT
1. Prepare
load for
drying.
• Dry items of similar fabric, weight and
construction in the same load.
• Separate dark items from light-colored items.
Separate items that shed lint from those that
attract lint.
• Check for stains which may not have been
removed in washing. Repeat stain removal
process and wash again before drying. Dryer
heat may permanently set some stains.
• Place delicate, rubber coated, or small items
in a mesh bag (not included).
• Be sure buckles, buttons and trim are
heatproof and won’t damage the drum
finish. Close zippers; fasten hooks and loop
fasteners. Tie strings and sashes to prevent
snagging and tangling.
DO NOT machine
wash items containing
fiberglass. Small
particles of fiberglass
left in drum may
transfer to fabrics in
other loads and cause
skin irritation and/or
damage to fabrics.
DO NOT wash water
resistant and water
repellent type clothing
or other materials.
2. Check
that the
lint filter is
clean and
in place.
DO NOT operate
dryer without lint filter
in place.
3. Load the
dryer and
close the
door.
• Load items loosely. The average wet load will
fill the drum 1/3 to 1/2 full. Items need room to
tumble freely for even drying and less wrinkling.
• If desired, place a dryer fabric softener sheet on
top of the load at the beginning of the cycle.
• When drying large items, dry only two or three
items at a time. Fill out the load with smaller
items.
• For delicate or very small loads, add two
or three similar items to improve tumbling action.
DO NOT overload
the dryer. To save
energy, time and
avoid uneven drying
and wrinkling avoid
overloading the dryer.
DO NOT over-dry.
Over-drying can cause
wrinkles, shrinkage,
lint, and a build up of
static electricity.
Operating the Dryer
WARNING
To reduce the risk of fire, electric shock or injury to persons, read the Important Safety
Information in this Use & Care Manual before operating your dryer.
WARNING
DO NOT operate dryer without lint filter in
place.
WARNING
Clean the lint filter after every load.
Loading ...
Loading ...
Loading ...