Loading ...
Loading ...
Loading ...
22
INSTALLATION
Decoupling the Laundry Center
(if Needed)
This Laundry Center can be disassembled
in special cases, such as to aid with moving
through the house and final installation
or during removal. If decoupling is not
necessary, skip these steps and proceed to
the Installing the Hole Plugs section.
NOTE
The units will not work separately when
disassembled and must be re-assembled
when final installation is complete.
WARNING
• Disassembling this Laundry Center must
be performed by a service agency or
qualified installers.
• This operation requires at least 2
people to move or lift the units. Do not
disassemble or repair this Laundry Center
by yourself.
• Use safety protective items such as
glasses, gloves, sleeves and shoes to
reduce the risk of injuries.
• ALWAYS DISCONNECT BOTH POWER
SUPPLIES BEFORE SERVICE OR REPAIR.
1. Use the tools listed in the Pre-
Installation Requirements section of
this Use & Care Manual.
2. Prepare the work area. Use protective
products designed to protect the floor
against water and scratches while
handling the units.
3. Rear Bracket
4. Dispenser Drawer
5. Lock Tab
6. Dispenser screws
4. Pull the drawer out until it stops.
5. Press down firmly on the lock tab in the
right rear corner of the dispenser cavity
to release, then pull out the drawer.
6. Unscrew the two screws in the
dispenser housing to remove.
3
5
4
6
3. Remove the two screws on the back
of the Laundry Center to disconnect
the dryer from the rear bracket. Do not
remove the bracket.
Loading ...
Loading ...
Loading ...