Loading ...
Loading ...
Loading ...
_ 50HM67 ENbook Page 62 Thursda;, March 29 2007 11:28 AM
LEDindications
The yellow, blue, and red/green LED lights on the TV (at the bottom center of the TV) indicate the TV's status, as described below.
Note: tf the TV loses A/C power (e.g., a power outage occurs or the power cord is unplugged), when power is restored, the yellow
LED will blink while the TV is booting until the remote control is usable. This is normal and is not a sign of malfunction.
TV front
Iiil
_E
I LAMP POWER
L?--T T
YellowLED BlueLED RedlGreenLED
"Voice announce" feature
When certain non-standard conditions occur, the LEDs
on the TV will blink and the TV will play a recorded
"voice announcement" describing the condition (see the table below
for the specific conditions that include a voice announcement).
To repeat the voice announcement and hear additional information,
press the MENU button on the TV while the LEDs are blinking.
1) Blue is ON (solid). The TV is operating
2) Green is ON (solid).
3) Yellow blinks.
4) Blue is ON (solid).
Yellow blinks.
properly.
Power-On Mode Fast.
Standby with Power-On
Mode Fast.
The lamp is not working
properly.
See "Setting the Power-On Mode feature" (=r_,page
35).
5) Yellow is ON The lamp is not working "Lamp not
(solid). Red blinks, properly after the eighth working"
automatic restart (see
item #3).
The lamp unit door is not
seated properly.
6) Yellow is ON
(solid).
7) Red blinks.
8) Blue blinks slowly.
Red blinks.
9) Blue blinks slowly.
10)Blue blinks quickly.
Fan stopped.
Abnormal operation of
BUS line. (light engine).
Abnormal operation of
BUS line.
Power Protect
Detection.
The color wheel has
stopped.
An abnormal
temperature increase
has occurred.
The TV will automatically try to restart itself eight times
(see item #4).
Note: If the TV is powered off and then quickly on again
when the lamp unit is hot, it may take several minutes
for the picture to appear on-screen. This is a property of
DLP e TV lamp technology and is NOT a sign of
malfunction. For details, see "Setting the Power-On
Mode feature" and "IMPORTANT NOTICE ABOUT
HOT LAMP RESTART" (_;_"page 35).
Turn the TV OFF and then ON again. If the problem
persists, contact TACP Consumer Solutions at 1-800-
631-3811 in the U.S. or TCL Customer Service at
1-800-268-3404 in Canada.
Turn OFF the TV and unplug the power cord. Review
"Lamp unit replacement and care" in Chapter 9 to
ensure that the lamp door is installed securely.
Turn OFF the TV and unplug the power cord. Plug the
power cord in again and turn ON the TV.
11)Blue blinks quickly.
Red blinks.
12)Blue blinks quickly. Turn OFF the TV. Check to make sure none of the slots
Yellow blinks, or openings in the TV cabinet are covered, blocked, or
Red blinks, dusty. Turn ON the TV again.
"Lamp door is
open."
"Fan stopped."
"Color wheel
stopped."
"Temperature
warning."
If, after trying the solution, the problem still exists:
• In the U.S., call TACP Consumer Solutions at 1-800-631-3811.
• In Canada, locate the nearest Toshiba authorized service depot by directing your web browser to www,toshiba,ea; click
"Home Entertainment," and then click "Support."
62
t
HM67 (E/F) Web 213:276
Loading ...
Loading ...
Loading ...