Loading ...
Loading ...
Loading ...
PROBLEM POSSIBLE CAUSE SOLUTION
Food does not broil The oven controls have been set • Press BROIL.
properly, incorrectly.
The rack has not been properly • See the broiling recommendation guide on
}ositioned. page 53.
Cookware not suited for broiling. • Use suitable cookware.
In some areas the power (voltage) • Preheat the broil element for 10 minutes.
may be low.
See the broiling recommendation guide on
page 53.
The oven The oven sensor needs to be • See the section on adjusting the
temperature is too adjusted, thermostat on page 58.
hot or too cold.
Scratches or The cooktop is being cleaned
abrasions on improperly.
cooktop surface.
®
Cookware with rough bottoms was
used on the cooktop or there were
coarse particles (eg. salt or sand)
}resent between the cookware
and the surface of the cooktop.
Cookware has been slid across the
cooktop surface.
Boilovers have been cooked onto
the surface.
Scratches are not removable. Tiny
scratches will become less visible in time
as a result of cleaning.
To avoid scratches, use the recommended
cleaning procedures. Make sure cookware
bottoms are clean before use, and use
cookware with smooth bottoms.
Brown streaks or • Use the blade scraper to remove soil.
specks.
• See the section on care and cleaning of
the glass cooktop on page 69.
Areas of Mineral deposits from water and • Remove using a ceramic-glass cooktop
discoloration with food have been left on the surface cleaning cream.
metallic sheen, of the cooktop. • Use cookware with clean, dry bottoms.
The oven will not The oven temperature is too high • Allow the range to cool and reset the
self-clea n. to set a self-clean operation, controls.
The oven controls have been set • See the section on self-cleaning on page
incorrectly. 64.
A self-cleaning cycle cannot be started if the oven lockout feature has been
activated or if a radiant surface element is on.
"Crackling" or • This is normal.
"popping" sound.
®
Excessive smoking
during a self-
cleaning cycle.
This is the sound of the metal
heating and cooling during
both the cooking and cleaning
functions.
There is excessive soiling in the
oveR.
Press OVEN OFF. Open the windows
to rid the room of smoke. Wait until the
self-cleaning cycle is cancelled. Wipe up
the excessive soil and reset the oven for
self-cleaning.
Allow the oven to cool.The oven door will The oven is too hot.
not open after a
self-cleaning cycle.
Oven not clean The oven controls were not set • See the section on self-cleaning on page
after a self-cleaning correctly. 64.
cycle, The oven was heavily soiled. • Wipe up heavy spillovers before starting
the self-cleaning cycle. Heavily soiled
ovens may need to be self-cleaned again
or for a longer period of time.
English - 76
Loading ...
Loading ...
Loading ...