Loading ...
Loading ...
Loading ...
ABOUT SURFACE COOKING
BEFORE COOKING
CAUTION
- Do not use the g ass cooktoD surface as a cutung Doara.
Do not place or store _temsthat can melt or catch fire on the g_asscooktoD, even
wnen it is not oe_ngused.
Turn the surface units on only after placing the cooKware on them.
o Do qot store heaw _tems above the cooktoa surface. They could fall and damage _t.
Z_ DURING COOKING
CAUTION
o Do qot olace aluminum foil or olaStlC items such as salt and DeDDer ShaKers. sooon
no_aers, or plastic wrappings on the range when _t s in use. The hot air from the vent
couia me t plastics or ignite flammable items
Make sb re the correct surface unit is turned on
Never COOKfood directly on the glass. Always use COOKware.
• Always place the Dan q the center of the surface unit you are COOKingon.
Never leave surface units unattenaea wme using a nigh heat setting. Boilovers cause
smoking and greasy spJllovers that may catch on fire,
Turn the surface units off before removing COOKware.
Do not use ulastJcwrap to cover food. Plastic ma_ melt onto the surface and be ver_
difficult to remove.
Cooling fan can De ooerated during COOKIOpCOOKing.
Z_ AFTER COOKING
CAUTION
• Do qot touch the surface units until they nave cooiea aown.
The surface may be st be hot aria burns may occur if the glass surface s touched
before it has cooled down sufficient!!/.
"nmea_ately clean sDs on the cook_ng area to orevent a tougn c_ean_ngcnore ater,
If you nave a cabinet directly aoove the cooking surface, maKe sure that the items
_n _tare nfrequently usea ana can be safely stored _nan area sup ected to heat.
Temoeratures in the cabinet ma/be unsafe for items such as volatile lic Jias. cleaners.
aria aerosol sprays.
About the radiant surface elements
The temperature of radiant surface elements rises gradually and evenly. As the temperature rises,
the radiant element will glow red. To maintain the selected setting, the element will cycle on and
off. The heating element retains enough heat to provide a uniform and consistent heat during the
off cycle. For efficient cooking, turn off the element several minutes before cooking is complete.
This will allow residual heat to complete the cooking process.
®
Radiant elements have a limiter that allows the element to cycle ON and OFF, even at the
HI setting. This helps to prevent damage to the ceramic cooktop. Cycling at the HI setting
is normal. It can also occur if the cookware is too small for the radiant element or if the
cookware bottom is not flat.
English - 34
Loading ...
Loading ...
Loading ...