Loading ...
Loading ...
Loading ...
7
Questions? We’re here to help!
Visit: www.maxi-matic.com for support on this product.
QUICK GUIDE TO
PROCESSING INGREDIENTS
Cut food with a rm consistency, such as fruit and vegetables,
into smaller pieces (1-1½ inches), then blend it.
FOOD RECOMMENDED BLENDING TIME
Fruits/vegetables (small pieces) 30s
Smoothies/cocktails 40s
Salsa 30s
Soups 30s
Baby food 40s
NOTE:
The processing times
are only a reference.
The actual blending
time depends on the
size of the ingredients,
their amount and the
required consistency.
CLEANING & MAINTENANCE
1. Before cleaning, make sure that the appliance is turned off
and disconnected from the power socket. Make sure the
rotating parts have stopped and remove the assembled
blending jar from the motor unit.
2. Remove the blade assembly from the blending jar and
thoroughly wash the individual parts in warm water using
neutral kitchen detergent. Then rinse them under clean
running water and wipe them dry with a ne wiping cloth
or allow them to dry naturally. If you used the cap, clean it
out in the same way. Removable parts can also be safely
washed in the top rack of the dishwasher. To thoroughly
clean out the blade assembly, use a ne nylon brush.
3. We recommend that you always wash the accessories
immediately after use to prevent the ingredients from
drying on. Ingredients that have dried on, are more difcult
to remove. To remove dried on ingredients, you may start
the blender with the blending jar lled up to 2/3 with hot
water. If the dried on ingredients are not released, repeat
the procedure.
4. To clean the outer surface of the motor unit, use a cloth
dipped in a weak detergent solution. After applying the
kitchen detergent, wipe the surface with a cloth lightly
dampened in clean water and then wipe dry.
5. Never submerge the motor unit or the power cord in water
or in any other liquid. Do not use thinners or solvents or
cleaning agents causing abrasion to clean the appliance.
Otherwise, the surface of the appliance may be damaged.
NOTE:
When removing and
cleaning the blade
assembly take special
care to avoid injury.
The edges on the
blade assembly are
sharp.
The blade assembly
has a gasket seal
to ensure that the
blending jar remains
air-tight during the
blending process. If
the blade assembly is
washed in a
dishwasher, this
gasket seal may come
loose due to heat.
After washing the
blade assembly,
always check that the
gasket seal is in its
place.
Certain foods may
cause discoloration
of the blending jar.
However, this does
not have any effect on
the functionality of
the appliance.
-
-
-
7
Loading ...
Loading ...
Loading ...