Loading ...
Loading ...
Loading ...
5
Questions? We’re here to help!
Visit: www.maxi-matic.com for support on this product.
BEFORE FIRST USE
1. Take the appliance and its accessories out of the packaging materials.
2. Thoroughly wash all parts intended for contact with food (large and small
blending jars, caps and the blade assembly), using warm water and a neutral
kitchen detergent. Then rinse with clean water and allow these parts to dry
naturally or dry them out thoroughly using a wiping cloth. All removable parts
can also be safely washed in the top rack of a dishwasher.
ATTENTION: When cleaning the blade assembly, take special care to avoid injury. The
blades are sharp. The blade assembly has a gasket seal to ensure that the blending jar
remains air-tight during the blending process. If the blade assembly is washed in a
dishwasher, this gasket seal may come loose due to heat. After washing the blade
assembly, always check that the gasket sea is in its place.
ASSEMBLING AND DISASSEMBLING
Before you start assembling or disassembling the appliance, check that the motor
unit is turned off and disconnected from the power socket and that the rotating
parts have come to a complete stop.
1. Turn the blending jar over so that the neck points upwards.
2. Check that the gasket seal on the blade assembly is in its place. Place the blade
assembly on to the neck of the blending jar so that the blades point inwards
and screw it clockwise on to the neck of the blending jar.
NOTE: Place the ingredients into the blending jar before attaching it to the blade
assembly. When lling the blending jar do not exceed the MAX mark.
3. Turn the assembled blending jar over so that the blade assembly points
downwards and insert it into the motor unit so that the tabs along the outer
perimeter of the blending bottle slide into the slots on the motor unit.
4. To disassemble, proceed in the reverse sequence.
Loading ...
Loading ...
Loading ...