Loading ...
Loading ...
Loading ...
2
Questions? We’re here to help!
Visit: www.maxi-matic.com for support on this product.
IMPORTANT SAFEGUARDS
The Elite Brand takes consumer safety very seriously. Products are designed and
manufactured with our valued consumers’ safety in mind. Additionally, we ask that
you exercise a level of caution when using any electrical appliance by following all
instructions and important safeguards.
READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE
REFERENCE
WARNING: When using electrical appliances, basic safety precautions should
always be followed as below:
1. This appliance may be used by
persons with physical or mental
impairments or by inexperienced
persons, if they are properly
supervised or have been informed
about how to use the appliance in
a safe manner and understand the
potential dangers.
2. Children must not use this appliance
or play with it. Keep this appliance
and the power cord out of reach.
3. The appliance is intended for
household use and is designed for
processing a standard amount of
food in the household.
4. Before connecting this appliance to a
power socket, make sure the voltage
stated on its rating label corresponds
to the voltage in our power socket.
We do not recommend using an
extension cord.
5. Do not use the appliance in an
industrial environment or outdoors.
6. Do not place the appliance on an
electric or gas stove or in its vicinity,
on a kitchen sink drain board, on the
edge of a table or on an unstable
surface. Only place the appliance on
an even dry and stable surface.
7. Only use the appliance with the
original accessories that came with it.
8. Do not use the appliance for any
other purposes than those for which
it is intended.
9. Warning: Improper use can lead to
injury.
10. Make sure that the appliance is
correctly assembled before putting it
into operation.
11. Pay increased attention when handling
hot liquids because they may release
steam or they could spray and cause
burns. Allow hot liquids and foodstuffs
to cool down to a temperature of at
least 45 °C before putting them into
the blending jar and blending them.
12. Do not leave the appliance in
continuous operation for longer than
1 minute. Before turning it on again,
allow it to cool down for at least 3
minutes
13. The appliance is equipped with a
thermal fuse protecting the motor
from damage in case of overload. If
automatic shut-off of the appliance
occurs in consequence of motor
overload, disconnect it from the
network socket and let it cool for at
least 30 minutes. Then bring the
appliance back in operation.
14. If ingredients stick to the blade
assembly or inside walls of the
blending jar, turn the appliance off
and unplug it from the power supply.
Make sure that the blade assembly has
stopped rotating. Take the blending jar
assembly off the motor unit and turn it
over so that the blade assembly points
upwards. Remove the blade assembly.
Use a plastic spatula to clean the blade
assembly and the walls of the blending
jar. Reassemble the blending jar and
mount it back on the motor unit. Plug
the power cord into a power socket
and continue blending.
15. Do not submerge the motor unit and
its power cord in water or any other
liquid, or wash these parts under
running water.
Loading ...
Loading ...
Loading ...