Loading ...
Loading ...
Loading ...
IWAKE-UPPlA BACKJ
RECORDING AND PLAYBACK USING AUDIO TIMER
5
]
1 I I
FI F] II 1
__1
=t"
1,8 7,11 9
* Both Deck I and Deck Ii can be used to play back tapes
Press the EJECT/STOP button of the deck to be used for
playback to open the cassette compartment door. insert
a prerecorded cassette, and close the door,
Set the COPY switch to the OFF ( Jm ) position
• If the COPY switch is in the ON ( _ )position, Deck I will not
operate untess Deck tt is in the REC or REC PAUSE mode
Press the appropriate DOLBY NR switches {OFF/B/C),
* Select the DOLBY NR switches for the type of Dolby noise
reduction that was used when the tape was recorded (or OFF
ff no noise reduction was used)
If using Deck II, set the TAPE SELECTOR [] switches
according to the type of tape used (See page 6 )
• This setting is unnecessary if Deck 1is used (Deck I is equip-
ped with an automatic tape selector function.)
5
6
7
Set the Reverse MODE switches appropriately, (See page
4)
if you wish to start playback in the direction opposite to
that shown by the lighted tape direction indicator, press
down the DIRECTION lever to select the opposite direc-
tlon,
Playback direction is changed each t_me the DIRECTION
lever iS pushed down
Press the PLAY button
• Play back the tape and set ti_e voiume on the amplifier to the
level you wish to usa for wake-up pIayback
Press the EJECT/STOP button to stop playback
Use the FAST buttons ( _ or 3_ ) to locate the point on the
tape from where you wish playback to begin
Set the audio timer
= All components should be off when you have finished setting
the timer
1 1 PresethePLA_buttono,thedecktobeus.
i
Ii Power to the components will be turned on at the time set on the
timer, and playback wilt begin automatically
15
<RRB 276>
Loading ...
Loading ...
Loading ...