Loading ...
Loading ...
Loading ...
TEC_TM_156 | REV. D | EN 9/12/2022 Page 83 of 9615 & 24 INCH INSTALL GUIDE
MAINTENANCE, CARE & CLEANING
IMPORTANT WARRANTY INFORMATION
NOTE: THE CLEANING OF THE CONDENSER IS NOT
COVERED BY WARRANTY!
If you have any questions, please contact your local
TRUE Manufacturing Service Department. See contact
information on page 8 or 88.
• Condenser coils accumulate dirt and require
cleaning every 30 days or as needed.
• A dirty condenser coil can result in non-
warranteed repairs and/or cabinet failure.
• Proper cleaning involves removing dust from the
condenser by using a soft brush, vacuuming the
condenser with a shop vac, or using CO
2
, nitrogen
or pressurized air.
• Do not place any filter material in front of the
condensing coil.
• On most units, the condenser is accessible by
removing the cabinet’s outer grill cover.
• If you cannot remove the dirt adequately, please
contact your licensed refrigeration service provider.
CONDENSATION
Excessive condensation can be caused by leaving the
door/drawer open for long periods of time or running
the cabinet with little to no product inside.
FIG. 1.
Pull the kickplate off the magnets.
FIG. 2.
Never brush across coil fins.
FIG. 3.
Verify all blockages have been removed.
Loading ...
Loading ...
Loading ...