Loading ...
Loading ...
Loading ...
TRUE RESIDENTIAL
®
TEC_TM_156 | REV. D | EN9/12/2022Page 34 of 96
PRIOR TO INSTALLATION
See finish (e.g., paint or stain) for application
instructions and drying / curing times. Drying / Curing
times vary by finish.
NOTE: Finish odors from panels installed
before fully drying /curing can linger and
be absorbed by the cabinet’s interior.
True is not responsible for lingering finish
odors inside the unit.
WINE RACK HANDLES
Follow recommended guidelines associated with
treating unfinished natural cherry wood.
NOTE: Remove the wine rack handles from the wine
rack assembly before applying finish!
REQUIRED TOOLS
Required tools include (but may not be limited to) the
following:
• Phillips Screwdriver or Bit Driver
• Drill (optional)
REMOVAL
1. Gently lift the wine rack handle and pull the wine
rack forward. See fig. 1.
2. Remove the wine rack handle from the wine rack
assembly. See fig. 2.
INSTALLATION
Finish odors from wine rack handles installed before
fully drying /curing can linger and be absorbed by the
cabinets interior. True is not responsible for lingering
finish odors inside the unit.
1. Install the wine rack handle on the wine rack
assembly. See fig. 2.
2. Position the wine rack on the slides and carefully
push the wine rack towards the back of the unit.
See fig. 3.
NOTE: BE SURE THE WINE RACK SITS UNDER
THE SLIDES REAR TABS. SEE FIG. 4.
WINE RACK HANDLE & OVERLAY PANEL FINISH APPLICATION
FIG. 1.
Lift and pull the wine rack forward.
FIG. 2.
Wine rack handle screw locations.
FIG. 3.
Slide the wine rack into place.
Loading ...
Loading ...
Loading ...