Loading ...
Loading ...
Loading ...
TRUE RESIDENTIAL
®
TEC_TM_156 | REV. D | EN9/12/2022Page 46 of 96
INSTALLATION
ANTI-TIP BRACKET INSTALLATION
(CONT.)
1. With the appropriate provided hardware, install the
anti-tip brackets. See fig. 2.
NOTE: THE CONCRETE SCREWS ARE BLUE.
2. Carefully position the unit in its final installation
location. Be sure the rear leveling legs slide into
the anti-tip brackets. See fig. 3.
NOTE: DO NOT LIFT THE CABINET BY THE
COUNTERTOPS, DOORS, DRAWERS, OR GRILLS.
LEVELING
Proper leveling of your TRUE unit is critical to
operating success. Leveling impacts effective
condensate removal and door operation.
With the cabinet in the final installation location, level
the unit front-to-back and side-to-side.
PROCEDURE
1. Position the level on the inside floor of the unit
near the doors (the level should be parallel to
cabinet front). Level the cabinet.
2. Position the level at the inside rear of the cabinet
(again, the level should be placed parallel to
cabinet back). Level the cabinet.
3. Perform procedures similar to steps 1 and 2 by
placing the level on the inside floor (left and right
side, parallel to the depth of the cooler). Level the
cabinet.
Loading ...
Loading ...
Loading ...