Loading ...
Loading ...
Loading ...
Care and Cleaning
Stainless Steel Outdoor Cooking Center
Stainless
steel
suTfaces
(on somemodels9
Do not use a steel wool pad; it will scratch the
stainless steel surface.
Clean with hot soapy water. Rinse and &T.
If food soil remains, tiT a general kitchen
cleaner, such as Fantastik "_,Simple Green ¢_or
Formula 409 _.
For hard to clean soil, use a standard stainless
steel cleaner such as I_)n-Ami * or Cameo °,.
Soils can also be soaked several hours with wet
towels. Apply cleaner witla a damp sponge,
rinse tlaoroughly and dry. Always scrub lightly
in the direction of the grain.
After cleaning, use a stainless steel polish such
as Stainless Steel Magic ®, Revere Copper and
Stainless Steeel Cleaner ®,or Wenol All
Purpose Metal Polish ®. Follow the product
instructions for cleaning the stainless steel
surface.
Rotisserie
Keep the rotisserie motor elecn'ic cord away
fi'om the heated surface of the grill. When not
in use remove and store the motor in a d_y
location.
Clean the skewer in warm sudsy water.
Burner
cleaning
Clean the exterior of the buruer(s) with a wire
brush.
Be sure burner ports are clear and free from
debris, Clear any clogged porks with a
straightened paper clip. Never use a wooden
tootlapick as it may-break offand clog tlae port,
Never enlarge tlae burner ports, Shake out any
debris through the air shutler,
Use a flashlight to inspect the burner inlet to
ensure it is not blocked, If obst_actions can be
seen, use a metal wire coat hanger that has been
straightened out to clear them,
NOTE: To ensure warranty- coverage and proper
performance of the grill and range-top burners,
monthly inspection and cleaning of all tlae grill
and range-top burner orifices is recommended.
S
Gdll burner for 27" 36" and48" models
Grill burners for 24" model
O,4fice
cleaning
Witla tlae burner(s) removed, remove flae
orifice and shine a flashlight tlarough the
opening to ensure there is no blockage.
Use a needle to clear any debris. Be ex_emely
careful not m enlarge the hole or break off
the needle.
Control
panel and
knobs
26
Clean up spatters wifla a damp cloth. Remove
heavier soil with warm, soapy water,
Do not use abrasives of any kind on the control
panel,
The comrol knobs may be removed for easier
cleaning, To remove a knob, pull it straight off
the stem, Wash the knobs in soap and water but
do not soak.
Loading ...
Loading ...
Loading ...