Loading ...
Loading ...
Loading ...
The Rotisserie System
Stainless Steel Outdoor Cooking Center
Rotisserie
system
(onsomem_)dels)
The rotisserie system is designed to cook items
from the back of the grill using infi'ared heat.
The rotisserie motor is equipped with metal
gears and is capable of turning up to a 12, 15
or 20 lb. cut of meat or poultry, depending on
the model. The actual capacity-is limited by
clearance and motor torque.
Maxiraum 24" model ............. 12 lb. turkey
Maxiraum 27" model ............. 15 lb. turkey
Maximum 36", 48" models ......... 20 lb. turkey
The rotisserie burner (on some models) is an
infrared type which provides imense searing
radiant heat. This intense heat is magnificent
for searing in the natural,juices and nutrients
found in qualily cuts of meat.
Once lit, the rotisserie burner will reach cooking
temperatures in about 1 minute. The orange/red
glow will even out in about 5 minutes.
WARNING: Electrical Grounding Instructions
This appliance rotisserie motor is equipped
with a three-prong (grounding) plug for your
protection against shock hazard and should be
plugged directly inlo a properly grounded
three-prong receptacle. Do not cut or remove
the grounding prong from the plug.
The rotisserie motor must be electrically
grounded in accordance with local codes or,
in dae absence of local codes, with the National
Electrical Code, ANSI/NFPA 70-1990.
If an extension cord is required to operate the
rotisserie motor, use only a grounded cord
approved for outdoor use. Use as short of cord
as possible and avoid wet areas.
AVER TISSEMENT : Instructions de mise d la term glectrique
Ce moteur de la r6tisserie de l'appareil est
muni d'une fiche fi trois broches (mise fi la
terre) pour votre protection contre le risque
de choc et doit Otre branch_ directement dans
une prise de courant _ trois alv_oles dfiment
reli_e ",?tla terre. Ne pas couper ni enlever de
la fiche la broche de liaison _ la 1erre.
Si une rallonge est requise pour faire
fonctionner le moteur de la r6tisserie,
utiliser un cordon reli_ _ la terre et approuw5
pour utilisation en plein air. Utiliser un
cordon aussi court que possible et ,_viter les
endroits mouill_s.
I,e moteur de la r6tisserie doit _?lre reti_ _ la
1erre alectriquement conformament aux codes
locaux ou, _ dafaut de codes locaux, selon le
Code electrique national, ANSI/NFPA 70-1990.
16
Loading ...
Loading ...
Loading ...