Loading ...
Loading ...
Loading ...
29
Operating Instructions
STEPS TIPS IMPORTANT
5. Add wash
products to
dispenser.
• Water conditioners, detergent boosters
and enzyme products may be added with
detergent.
• See
Adding Laundry Products
for detailed
information on the use of the product
dispensers.
• See
Adding Laundry Products
for
detailed information on the use of various
wash products (detergent, bleach, stain
treatment, fabric softener, etc).
Follow manufacturer’s
instructions and
recommendations when
using wash products.
Open and close the
dispenser drawer slowly.
Closing the drawer too
quickly could result in
early dispensing of the
bleach or fabric softener.
6. Select the
cycle and
settings for
the load.
• See
Cycle Selection, Cycle Settings, and
Cycle Options
for detailed descriptions of
cycle controls.
• See
Cycle Setting Charts
to determine
which settings are available for each
cycle.
• To provide the best care, not every setting
or option is available with every cycle. If
a setting or option is not available for the
cycle selected, the indicator will not light.
Follow fabric care label
instructions on items to
be washed.
Make sure that the
PODS
®
option is
selected when using
models that have a
separate detergent
pack compartment.
See Adding Laundry
Detergent to the
Adaptive Dispenser™
7. Start the
washer.
• Close the door and press start/pause.
The washer will not operate with the door
open. “CLOSE DOOR” will be displayed
as a reminder to close the door.
• To add a forgotten item to the washer
any time during the wash portion of the
cycle, press start/pause. When the door
unlocks, open the door, add the item,
close the door and press start/pause to
resume cycle.
• To change settings or options after the
cycle has begun, press start/pause,
change the settings, and then press
start/pause. If the cycle is not paused
first, the unit will emit several beeps when
the buttons are pressed but no changes
to the cycle will be applied.
• To change the cycle once the cycle has
begun, press cancel to cancel the cycle,
select the new cycle, and press start/
pause to begin the new cycle. Changing
a cycle selection without cancelling the
current WILL NOT change the cycle.
• To cancel a cycle, press cancel.
• A signal will sound at the end of the cycle
if the chime option is not set to mute.
DO NOT force door
open. As a safety mea-
sure, the door will auto-
matically lock during the
entire wash cycle. Pause
or cancel the wash load
to unlock the door.
If the cycle is interrupted
during spin, the door
lock will not release until
the tub has stopped
spinning.
If the water level is above
the bottom of the door
opening/flexible door
gasket, the lock will not
release.
8. Remove
items from
washer when
cycle has
ended.
• Remove items when the cycle ends
and place in dryer, line dry or dry flat as
directed on the fabric care label.
Excess wrinkling, color
transfer or odors may
develop in items left in
the washer after the
cycle has ended.
PODS
®
is a registered trademark of Procter & Gamble Company, Cincinnati OH, used under license by Electrolux.
Loading ...
Loading ...
Loading ...