Loading ...
Loading ...
Loading ...
98 GETTING TO KNOW YOUR VEHICLE
To remove the hard top front panel(s), proceed as
follows:
1. Fold down the sun visor against the
windshield.
2. Turn the three L-shaped locks on the left side
panel (one at the front, the rear, and outside),
unlocking them from the roof.
Step Two
3. Unlatch the left side header panel latch
located at the top of the windshield.
Step Three
4. Remove the left side panel.
5. Repeat the previous steps to remove the right
side panel.
Hard Top Panel(s) Storage Bag —
If Equipped
The Freedom Top panels storage bag allows you to
store your hard top panels. The storage bag
contains two compartments.
Lay the bag for the Freedom Top panels down so
the loops and hooks are facing upward. Unzip the
bag and fold back the outer flap.
NOTE:
Ensure the front panel latch is closed prior to
inserting the panel into the panels bag.
1. Insert the left side hard top panel into the bag
with the latches facing upward.
2. Unfold the black panel divider (ensure the
divider is lying flat).
3. Insert the right side Freedom Top panel into
the bag with the latches facing downward.
NOTE:
Ensure the front panel latch is closed prior to
inserting the panel into the bag.
4. Unfold the outer flap and zip the hard top bag
closed.
Step Four
1 — Header Panel Latched
2 — Unlatched Position
22_JL_OM_EN_USC_t.book Page 98
Loading ...
Loading ...
Loading ...