Loading ...
Loading ...
Loading ...
74 GETTING TO KNOW YOUR VEHICLE
Power Inverter
The power inverter is designed with built-in
overload protection. If the power rating of
150 Watts is exceeded, the power inverter
automatically shuts down. Once the electrical
device has been removed from the outlet, the
inverter should automatically reset. If the power
rating exceeds approximately 170 Watts, the
power inverter may have to be reset manually.
AUXILIARY SWITCHES — IF EQUIPPED
Four auxiliary switches located in the lower switch
bank of the instrument panel can be used to power
various electrical devices. You have the ability to
configure the functionality of the auxiliary switches
via the Uconnect Settings Ú page 218.
All switches can be configured as follows:
Switch type operation: Latching or Momentary
Power source: Battery or Ignition
Ability to hold last state across key cycles: On or
Off
Auxiliary Switches
NOTE:
Holding last state conditions are met when switch
type is set to latching and power source is set to
ignition.
The auxiliary switches manage the relays that
power four blunt cut wires. These wires are located
under the instrument panel in the passenger
compartment and under the hood to the right, near
the battery.
Auxiliary Switch Connections – Under Hood
Auxiliary Switch Connections – Under Instrument Panel
WARNING!
To avoid serious injury or death:
Do not insert any objects into the receptacles.
Do not touch with wet hands.
Close the lid when not in use.
If this outlet is mishandled, it may cause an
electric shock and failure.
22_JL_OM_EN_USC_t.book Page 74
Loading ...
Loading ...
Loading ...