Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 65
Driver And Passenger Temperature Up And
Down Buttons
Provides the driver and passenger with
independent temperature control.
Push the red button on the faceplate or
touchscreen or press and slide the
temperature bar towards the red arrow
button on the touchscreen for warmer
temperature settings.
Push the blue button on the faceplate or
touchscreen or press and slide the
temperature bar towards the blue arrow
button on the touchscreen for cooler
temperature settings.
NOTE:
The numbers within the temperature display will
only appear if your vehicle is equipped with an
Automatic Climate Control system.
SYNC Button
Press the SYNC button on the
touchscreen to toggle the SYNC feature
on/off. The SYNC indicator illuminates
when SYNC is on. SYNC synchronizes the
passenger temperature setting with the driver
temperature setting. Changing the passenger’s
temperature setting while in SYNC will
automatically exit this feature.
NOTE:
The SYNC button is only available on the touch-
screen.
Blower Control
Blower Control regulates the amount of
air forced through the Climate Control
system. Adjusting the blower will cause
automatic mode to switch to manual
operation. There are seven blower speeds
available. The speeds can be selected using either
the blower control knob on the faceplate or the
buttons on the touchscreen.
Faceplate: The blower speed increases as you
turn the blower control knob clockwise from the
lowest blower setting. The blower speed
decreases as you turn the blower control knob
counterclockwise.
Touchscreen: Use the small blower icon to
reduce the blower setting and the large blower
icon to increase the blower setting. The blower
can also be selected by pressing the blower bar
area between the icons.
Mode Control
Select one of the Mode buttons on the
touchscreen or press the Mode button on
the faceplate to adjust the airflow
distribution. The airflow distribution can
be adjusted so air comes from the instrument
panel outlets, floor outlets, defrost outlets, and
demist outlets.
Panel Mode
Air comes from the outlets in the
instrument panel. Each of these outlets
can be individually adjusted to direct the
flow of air. The air vanes of the center
outlets and outboard outlets can be moved up and
down or side to side to regulate airflow direction.
There is a shut-off wheel located below the air
vanes to shut off or adjust the amount of airflow
from these outlets.
Keep all objects a safe distance from the
window.
CAUTION!
2
22_JL_OM_EN_USC_t.book Page 65
Loading ...
Loading ...
Loading ...