Loading ...
Loading ...
Loading ...
354 IN CASE OF EMERGENCY
6. Block both the front and rear of the wheel
diagonally opposite of the jacking position. For
example, if the driver’s front wheel is being
changed, block the passenger’s rear wheel.
Wheel Blocked Example
NOTE:
Passengers should not remain in the vehicle when
the vehicle is being lifted or raised.
JACK LOCATION
The jack and lug wrench are located in the rear
cargo area. To remove jack and tools proceed as
follows:
1. Lift the load floor in the cargo area.
Load Floor Handle
NOTE:
The load floor can be removed for easier access by
pulling the load floor handle up and directly
rearward.
2. Remove the hardware storage cover by
pinching the latch on the left side and pulling
upward.
Hardware Storage Cover Latch
3. Turn the plastic wing nut counterclockwise to
loosen the jack from the storage bin.
Plastic Wing Nut Location
4. Remove tool kit and assemble tools.
SPARE TIRE REMOVAL
1. To remove the spare tire from the carrier,
remove the tire cover, if equipped.
2. Remove the Rear Camera Cover by turning the
lock bolt counterclockwise with the #T40 torx
head driver and ratchet from the supplied tool
kit.
22_JL_OM_EN_USC_t.book Page 354
Loading ...
Loading ...
Loading ...