Loading ...
Loading ...
Loading ...
OPERATION
OvenControl, Clock and Timer
Your new control has a series of tones
that will sound at different times. These
tones may sound while you set the
control for an oven function, or at the
end of the oven function It will also alert
you there may be a problem with the
functions. Below are the types of tones
and a brief description of each.
TONES WHILE SETTING THE
CONTROL--When you press a touch
pad you wilt hear a beep This beep will
let you know you have placed enough
pressure on the pad to activate iL (The
arrow pads do not beep.)
END OF TIMED CYCLE TONE--At
the end of an automatic timed cooking
function, you will hear 3 short beeps
followed by 1 beep every 6 seconds.
This 6 second beep will continue to
sound every 6 seconds until the
CLEAR/OFF pad is pressed or you
may select the special feature to cancel
this 6 second beep from sounding at
the end of future cycles.
TO CANCEL THE 6 SECOND
BEEP
1. Press and hold the BAKE and
BROIL pads, at the same time
for 3 seconds, until the display
shows "SF"_
2. Press the KITCHEN TIMER
ON/OFF pad. The display will show
"CON BEEP" (continous beep),
3. Press the KITCHEN TIMER
ON/OFF pad again. The display will
show "BEEP" (beep canceled)
4, Press the START pad to cancel the
6 second beep and leave the
special feature mode.
If you would like to return the 6 second
beep, repeat steps above until the
display shows your choice and press
Start.
ATTENTION TONE--This tone will
sound if you make an error or an
oversight is made while setting an
oven function
Examples would be:
a. Setting a clean cycle and the oven
door is not properly closed.
b. Setting function and not pressing
Start.
Cl
Pressing an additional function pad
without first setting a temperature or
time.
d. ERR will flash if you set an invalid
temperature. Press the CLEAR/OFF
pad to clear the control and reset
your oven function.
Any of these can be quickly identified
by watching the display.
PREHEAT TONE--When you set an
oven temperature, the oven automati-
cally starts to heat, When the tempera-
ture inside the oven reaches the tem-
perature you have set, a tone will sound
to let you know the oven is ready for
baking,
If you set an oven function and the
control beeps while the display is
flashing "F" and a number or letter
such as "F.4" or "Fr' there may be a
problem with the control or oven.
Simply press the CLEAR/OFF pad and
wait about an hour Try setting the
function again, ff the code repeats, write
down the flashing code and call for
service. Tell the technician what code
was flashing,
12
Loading ...
Loading ...
Loading ...