Loading ...
Loading ...
Loading ...
GB
52
SOLVING OPERATIONAL PROBLEMS
Before contacting service, check the following to avoid unnecessary service charges.
OVEN PROBLEM PROBLEM SOLVING STEPS
Other F__ Error appears in
the display window.
Remove power and turn it back on again after a few
seconds. If condition persists, note the code number (in
the EVENT LOG list) and contact service.
The oven display stays
OFF
Turn off power at the main power supply (fuse or breaker
box). Turn breaker back on.
If condition persists, call an authorized service.
Cooling fan continues to
run after oven is turned off
The fan turns off automatically when the electronic
components have cooled sufficiently.
Oven is not heating Check the circuit breaker or fuse box to your house.
Make sure there is proper electrical power to the oven.
Make sure the oven temperature has been selected.
Oven is not cooking evenly Refer to cooking charts for recommended rack position.
Always reduce recipe temperature by 25°F (15°C) when
baking with Convection Bake mode.
Oven light is not working
properly
Replace or reinsert the light bulb if loose or defective.
See Page pagina 50. Avoid touching the bulb glass
with bare fingers as finger oil may cause bulbs to burn
out prematurely.
Oven light stays on Check for obstruction in oven door. Check to see if hinge
is bent or door switch broken.
Clock and timer are not
working properly
Make sure there is proper electrical power to the oven.
See the Clock sections on Page pagina 21.
Excessive moisture When using Bake mode, preheat the oven first.
Convection Bake and Convection Roast will eliminate
any moisture in oven (this is one of the advantages of
convection).
Porcelain chips When oven racks are removed and replaced, always tilt
racks upward and do not force them to avoid chipping
the porcelain.
Loading ...
Loading ...
Loading ...