Loading ...
Loading ...
Loading ...
GB
11
Connection to the electrical power mains
WARNING
This apparatus must be earthed.
The oven is only for domestic use.
The feed voltage and the absorbed power are as indicated on the data plate attached to
the left-hand side upright, which can be seen when the oven door is open.
Connecting must be carried out by qualified personnel and in accordance with the
regulations currently in force.
The manufacturer can not be held responsible for any damages to persons or objects
caused by failure to observe these instructions.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
The oven must be connected to the mains through a multipole circuit breaker with
a contact-to-contact gap of at least 3 mm, making sure that the earth wire is not
disconnected. For connecting use a flexible cable remembering to make it long enough
to allow the oven to be removed from its housing unit when maintenance work is
required.
Such a device must be fitted to the power supply in compliance with the regulations
governing electrical installations.
The socket or switch must be easily reachable with the oven fully installed.
CABLE TYPES AND MINIMAL DIAMETERS
SASO
H05RR-F 3x1,5 mm
2
H05RR-F 3x2,5 mm
2
H05VV-F 3x1,5 mm
2
H05VV-F 3x2,5 mm
2
H05RN-F 3x1,5 mm
2
H05RN-F 3x2,5 mm
2
H05V2V2-F 3x1,5 mm
2
H05V2V2-F 3x2,5 mm
2
Loading ...
Loading ...
Loading ...