Loading ...
Loading ...
Loading ...
7-159
07
OJWEV071301L
OJWEV071302L OJWEV071350N
The ‘Camera error or blockage’ or
‘Ultrasonic sensor error or blockage’
warning message will appear on the
cluster if the following situations occur:
śThe camera(s) or ultrasonic sensor(s)
is covered with foreign material, such
as snow or rain, etc.
śThere is inclement weather, such as
heavy snow, heavy rain, etc.
If this occurs, Parking Collision-
Avoidance Assist may turn off or may
not operate properly. Check whether
the cameras and ultrasonic sensors are
clean.
Limitations of Parking Collision-
Avoidance Assist
Parking Collision-Avoidance Assist may
not assist braking or warn the driver even
if there are pedestrians or objects under
the following circumstances:
śAny non-factory equipment or
accessory is installed
śYour vehicle is unstable due to an
accident or other causes
śBumper height or rear ultrasonic
sensor installation has been modified
śWide view camera (s) or ultrasonic
sensor (s) is damaged
śWide view camera(s) or the ultrasonic
sensor (s) is stained with foreign
material, such as snow, dirt, etc.
śWide view camera (s) is obscured by a
light source or by inclement weather,
such as heavy rain, fog, snow, etc.
śThe surrounding is very bright or very
dark
śOutside temperature is very high or
very low
śThe wind is either strong (above
12 mph (20 km/h)) or blowing
perpendicular to the rear bumper
śObjects generating excessive
noise, such as vehicle horns, loud
motorcycle vehicles or truck air
brakes, are near your vehicle
śAn ultrasonic sensor with similar
frequency is near your vehicle
śThe road is slippery or inclined
śThe pedestrians are difficult to detect
śThe image of the pedestrian in the
front view camera is indistinguishable
from the background
śThere is ground height difference
between the vehicle and the
pedestrian
Loading ...
Loading ...
Loading ...