Loading ...
Loading ...
Loading ...
7-109
07
+LJKZD\/DQH&KDQJH$VVLVWRSHUDWLQJ
Turn signal switch
ORG3EV071216L
[1] : Center
Highway Lane Change Assist function
will operate, when you push the turn
signal lever up or down to the A or B
position while the function is in the ready
state (
indicator is green), and all of
the following conditions are satisfied:
śThe driver has his/her hand on the
steering wheel
śThere is no collision risk in the
direction of lane change
śThere is a single dotted lane line in the
direction of lane change
śThere are no Forward Collision-
Avoidance Assist and Blind Spot
Collision-Avoidance Assist warnings
śThe vehicle is driven in the middle of
the lane (should not be driving close
to one side of the lane)
śThe road you are driving on, or the
road you are about to change lane is a
road that the function can operate
Information
When the turn signal lever is placed at B
position for a certain period of time, the
green arrow will appear. At this time, even
when the lever is released and returns to
it’s original position (1), lane change will
still be assisted.
While lane change is being made by the
function, the turn signal indicator will
blink even when the turn signal lever is
not held, and the turn signal indicator will
turn off when lane change is complete.
+LJKZD\/DQH&KDQJH$VVLVWVWDQGE\
Highway Lane Change Assist function
will be in the standby state when one of
the ready state condition is not satisfied,
or when entering or driving on one of the
following roads:
śRoad within a certain distance from
the tollgate on the main road of the
highway (or motorway)
śThe road ahead ends without an
interchange or junction
śRoad with sharp curves
śRoad with narrow lanes
śRoad that is under construction
+LJKZD\/DQH&KDQJH$VVLVWFDQFHO
The function will be cancelled when:
śThe turn signal lever is turned on in
the opposite direction of lane change
śThe steering wheel is steered sharply
Loading ...
Loading ...
Loading ...