Loading ...
Loading ...
Loading ...
1-34
Foreword / Starting your Electric vehicle
OJWEVQ011033
7. Check if the charging indicator light
(
) of the high voltage battery on
the instrument cluster is turned ON.
Charging is not active when the
charging indicator light (
) is OFF.
If the charging cable is not connected
to the vehicle side inlet properly,
charging may not start. In this case,
try reconnecting charging cable to
vehicle inlet again.
Information
To control the temperature of the high
voltage battery while charging or when
the battery temperature is high, the air
conditioning is used to cool down the
battery. It may generate noise or vibration
from operation of the air conditioning
compressor and cooling fan, but it is a
normal condition when charging the high
voltage battery. Also, the air conditioning’s
performance may be reduced due to
operation of the cooling system to charge
the high voltage battery. This is a normal
condition.
Information
śEven though charging is possible with
the Start/Stop button in the ON/START
position, for your safety, start charging
when the Start/Stop button is in the
OFF position and the vehicle shifted to
P (Park). After charging has started,
you can use electrical components such
as the radio by pressing the Start/Stop
button to the ACC or ON position.
śDuring AC charging, the radio
reception may be poor.
śDuring charging, the gear cannot be
shifted from P (Park) to any other gear.
OJWEVQ011117N
8. After charging has started, the
estimated charging time is displayed
on the instrument cluster for about 1
minute.
If you open the drivers door while
charging, the estimated charging time
is also displayed on the instrument
cluster for about 1 minute. When
scheduled charging or scheduled
air conditioning/heating is set, the
estimated charging time is displayed
as “--” .
Loading ...
Loading ...
Loading ...