Loading ...
Loading ...
Loading ...
1-17
01
OJWEVQ011065
3. Check the operation status through
the front indicator of the power outlet.
śBlue: Standby
śRed: No power supply even the
power outlet is connected
śGreen: Normal power supply
through the normal connection of
the power outlet.
Information
śV2L discharging mode will shut off if
the vehicle is off using indoor V2L on
the vehicle state of ON.
śOpening the charging door or
connecting the V2L connector to the
charging inlet, the V2L discharging
mode will shut off. If you want to
use the indoor and outdoor V2L
simultaneously, firstly connect the V2L
connector to the charging inlet and use
the indoor V2L.
CAUTION
śBe well-informed of the manual to
prevent accidents.
śThe V2L discharging mode is
blocked automatically in case of
overheating. (When the discharging
mode is blocked, check whether
the V2L connector or power plug
is contaminated, worn, corroded
or broken or the home appliance
capacity is over 16 A. If the
temperature falls to proper level
after it is left unattended, you can
use it again. Use proper home
appliances.)
śDo not remodel or disassemble
the provided V2L connector. The
failure caused by remodeling or
disassembling is not covered by the
warranty.
śDo not drop the V2L connector or
give a strong impact to it.
śDo not place objects on the V2L
connector.
śBe sure to disconnect the V2L
connector from the vehicle when you
are finished using V2L.
śWhen the high voltage battery
charge reaches the set discharging
limit(%), the operation stops, and
a warning message is displayed on
the instrument panel. If you want
V2L operation, set the discharging
limit(%) lower than the current
battery charge.
śWhen using various electric
products, use them below the
maximum power capacity that can
be supplied by the vehicle.
Loading ...
Loading ...
Loading ...