Loading ...
Loading ...
Loading ...
OPERATION
OvenControl,Clockand Timer
Your new control has a series of tones
that will sound at different times
These tones may sound while you set
the control for an oven function, or at
the end of the oven function It will also
alert you that there may be a problem
with the functions° Below are the types
of tones and a brief description of
each
TONES WHILE SETTING THE
CONTROL - When you press a touch
pad you wilt hear a beep, This beep
wilt let you know you have placed
enough pressure on the pad to activate
it (The arrow pads do not beep )
END OF TIMED CYCLE TONE - At
the end of a timed cooking function,
you will hear 3 short beeps followed by
1 beep every 6 seconds, This 6 second
beep wilt continue to sound until the
CLEAR/OFF pad is pressed or you
may select the speciai feature to cancel
this 6 second beep from sounding at
the end of future cycles
TO CANCEL THE 6 SECOND BEEP
1. Press and hold the BAKE and
BROIL pads, at the same time for
3 seconds, until the display shows
"SF."
2. Press the KITCHEN TIMER pad
The display will show "CON
BEEP" (continuous beep)
3. Press the KITCHEN TIMER pad
again, The display will show
"BEEP" (beep canceled)
4. Press the START pad to cancel the
6 second beep and leave the
special feature mode
If you would like to return the 6 second
beep, repeat steps above until the
display shows your choice and press
the START pad
ATTENTION TONE - This tone will
sound if you make an error or an
oversight is made while setting an
oven function
Examples would be:
a. Setting a clean cycle and the oven
door is not properly closed
b. Setting function and not pressing the
START pad
c. Pressing an additional function pad
without first setting a temperature or
time
Any of these can be quickly identified
by watching the display
PREHEAT TONE - When you set
an oven temperature, the oven
automatically starts to heat When the
temperature inside the oven reaches
the temperature you have set, a tone
will sound to let you know the oven is
ready for baking
If the control beeps while the display
is showing "F" and a number or letter
such as "F-4" or "Fr' there may be
a problem with the control or oven
Simply press the CLEAR/OFF pad
and wait about an hour. Try setting the
function again If the code repeats,
write down the flashing code and call
for service Tell the technician what
code was flashing
9
Loading ...
Loading ...
Loading ...