Maytag MERH865RAW1 electric freestanding range

User Manual - Page 5

For MERH865RAW1.

PDF File Manual, 64 pages, Read Online | Download pdf file

MERH865RAW1 photo
Loading ...
Loading ...
Loading ...
Cleantn
Self-Clean Oven
To set Self=Clean:
Note: Oven temperature must be below 400° F to program
a clean cycle.
The self-clean cycle uses above-normal cooking temperatures
to automatically clean the oven interior.
The oven should be cleaned regularly by wiping up spillovers
to prevent excessive smoke and flare-ups. Do not allow a
heavy build-up of soil to accumulate in the oven.
During the cleaning process, the kitchen should be well
ventilated to get rid of normal odors associated with cleaning.
Before Self=Cleaning
1. Turn off the oven light before cleaning. The light may burn
out during the clean cycle.
2. Remove all pans and oven racks from the oven. The oven
racks will discolor and may not slide easily after a self-
clean cycle if they are not removed.
3. C.ean oven frame, doorframe, area _,,,-,,__ J,_,_,__'_
outside of gasket, and around the ", -
opening in the door gasket with a
nonabrasive cleaner such as Bon _:_X:_X_3___'_
Ami* or detergent and water. The
self-cleaning process does not
clean these areas. They should be
cleaned to prevent soil from baking on during the clean
cycle. (The gasket is the seal around the oven door and
window.)
4. To prevent damage, do not clean or rub the gasket around
the oven door. The gasket is designed to seal in heat
during the clean cycle.
5. Wipe up excess grease or spillovers from the oven bottom.
This prevents excessive smoking, flare-ups or flaming
during the clean cycle.
6. Wipe up sugary and acidic spillovers such as sweet
potatoes, tomato, or milk-based sauces. Porcelain enamel
is acid-resistant, not acid-proof. The porcelain finish may
discolor if acidic spills are not wiped up before a self-clean
cycle.
To Delay a Self=Clean Cycle:
1. Press the Delay 1 pad.
DELAY flashes.
1. Close the oven door.
2. Press the Clean pad /
CLEAN flashes.
SETflashes in the display. U
3. Press the Autoset O pad. Autose[
MEd (Medium Soil, 3 hours) is displayed.
4. Press the Autoset Opad to scroll through the
self-cleaning settings.
HVy (Heavy Soil, 4 hours)
MEd (Medium soil, 3 hours)
LITE( Light Soil, 2 hours)
Choosing the soil level of the oven automatically programs
the self-cleaning time.
5. After four seconds, the oven will start cleaning.
If the door is not closed, beeps will sound and "door" will
display. If the door is not closed within 30 seconds, the
self-cleaning operation will be canceled and the display
will return to the time of day.
CLEAN will appear in the display.
LOCK will flash in the display. Once the door locks, the
word will remain steady.
The cleaning time will start counting down in the display.
1
Delay
00:00 will flash in the display.
Enter the amount of time you want to delay the cycle using
2,
3.
the appropriate number pads.
Press the Clean pad.
SETflashes in the display.
Press the Autoset 0 pad.
LITE (Light soil level) is displayed.
0
,_,uloset
cont.
Brand names for cleaning products are registered trademarks of the respective manufacturers.
4
Loading ...
Loading ...
Loading ...