Loading ...
Loading ...
Loading ...
Using YourGarageDoorOpener
Your Security÷® openerand hand-held remote control
havebeenlactory-set to a matching code which changes
with eachuse, randomly accessing over 100 billion
newcodes. Your openerwill operate with up to eight
Security÷ ®remotecontrols andone Security+ ® Keyless
Entry System. If you purchase a new remote, or if you
wish to deactivateany remote, follow the instructions in
the Programming section.
Activateyour opener withany ofthe following:
• TheHand-Held Remote Control; HeRdthe large push
button down untit the door starts to move.
o TheWall-Mounted Door Control."Hold thepush button
or bardown until the door starts to move.
• TheKeylessEntfv (seeAccessories): If provided with
your garagedoor opener, it must be programmed
before use. See Programming.
Whenthe opener is activated (with the safetyreversing
sensor correctlyinstalled and aligned):
t. If open, thedoor will cfose. It dosed, it will open.
2, If closing, the door will reverse.
3. If opening, the door will stop.
4. If the door has beenstopped in apartially open
position, it will close,
5. It obstructed while closing, the door witi reverse. Ifthe
obstruction interrupts the sensor beam,the opener
lights will blink for five seconds.
6. if obstructed while opening, the door will stop.
7. If fully open, the door will not close when the beamis
broken. Thesensor has no eitect in the opening cycle.
if the sensor is not installed, or is misaligned, the door
won't close from a hand-held remote. However,you can
close the door with the door control the Outside Keylock,
or KeylessEntry, if you activate them until down travel
is complete. If you release them [oo soon, the door will
reverse,
Theopenerlights will turn on under the following
conditions: when the opener is initially plugged in; when
power is restoredafter interruption; whenthe opener is
activated.
Theywitl turn off automatically niter 4-!/2 minutes or
provide constant light when the Light featureon the
Multi-Function Door Control is activated, Bulb size is A19,
Bulb power is 100watts maximum.
Security.i,_ light feature: Lights witl also turn on when
someonewalks through the open garagedoor. With a
Multi-Function Door Control, this feature may be turned off
asfollows: With the opener lights off, press and hold the
fight button for 40seconds, untit the tight goes on, then off
again. To restore this feature, start with the opener lights
on,then press and hold the light button for t0 seconds
until the light goes off, then on again.
32
Loading ...
Loading ...
Loading ...