Loading ...
Loading ...
Loading ...
I II IIIIIII IIIIIIII IIIIIIIIIIIIIIII
INSTALLATION STEP 9
ElectricalRequirements
To avoid installation difficulties, do notrun theopener
at thistime.
To reducethe risk of electric shock, your garagedoor
opener has a grounding type plug with a third grounding
pin. This plug wilt only fit into a grounding type outlet.
it the plug doesn't fit into the outlet you have,contact a
qualified electrician to install the proper outlet.
If permanentwiring isrequired by yourlocal code, refer
to the following procedure.
To make a permanent connection through the 7/8" (2 cm)
hole in the top of the motor unit:
• Removethe motor unit cover screws and set the cover
aside.
- Removethe attached 3-prong cord.
, Connectthe black (line) wire to the screw on the brass
terminal; thewhite (neutral) wire to the screw on
the silver terminal; and the ground wire to the green
ground screw.The opener mustbegrounded.
• Reinstallthe cover,
To avoid installation difficulties, donotrun the opener
at thistime.
To prevent possibte SERIOUSINJURY or DEATHfrom
electrocution or fire:
• Besurepower is NOTconnected to theopener,
anddisconnect power to circuit BEFOREremoving
cover to establish permanent wiring connection.
• Garagedoor installation and wiring MUSTbe in
compliance with ALL Iocai electrical and building
codes.
• NEVERuseanextension cord, 2-wire adapteror
changeplug in ANYway to make it tit outlet. Be
surethe opener is grounded.
PERMANENTWIRING
CONNECTION
Ground Tab
Green
Ground
Screw
Ground Wire
White Wire
WhiteWire 7 i _iarCek
!9
Loading ...
Loading ...
Loading ...