Loading ...
Loading ...
Loading ...
Test the wireless connection
Print the wireless test report for information about the printer wireless connection. The wireless test report
provides information about the printer status, hardware (MAC) address, and IP address. If there is a problem
with the wireless connection or if a wireless connection attempt failed, the wireless test report also provides
diagnostic information. If the printer is connected to a network, the test report displays details about the
network settings.
To print the wireless test report
1. From the printer control panel, touch or swipe down the tab at the top of the screen to open the
Dashboard, touch
(the Wireless button), and then touch (Settings).
2. Touch Print Reports.
3. Touch Wireless Test Report.
Turn on or oîž« the wireless capability of the printer
The blue Wireless light on the printer control panel is lit when the wireless capability of the printer is on.
NOTE: Connecting an Ethernet cable to the printer automatically turns oîž« the wireless capability and the
Wireless light.
1. From the printer control panel, touch or swipe down the tab at the top of the screen to open the
Dashboard, touch
(the Wireless button), and then touch (Settings).
2. Touch Wireless Settings.
3. Touch the toggle button next to Wireless to switch it on or oîž«.
NOTE: If the printer has never been congured to connect to a wireless network before, turning on the
wireless capability will automatically start the Wireless Setup Wizard.
ENWW Set up the printer for wireless communication 33
Loading ...
Loading ...
Loading ...