Loading ...
Loading ...
Loading ...
26
2.
Turn SELECT to your selecting network setting option:
Need to access to another Router? Intitiate SetupWizard
Need to set up a WPS encrypted network? PBC Wlan setup
Need to get MAC address, Wlan region, IP address etc? ---------- View settings.
Need to shift to another Wlan region? ---------- Wlan region
Need to view IP settings or Subnet mask ----------- Manual settings
Need to see the list of registered networks or delete some of unwanted networks?
---------- Network profile
3.
Press SELECT to confirm to enter the corresponding setting.
7.3 Language
1. The language section can be found as follows: < Main menu> < System settings >
<Language>, press SELECT to confirm.
2. Turn SELECT until your desired language is displayed, then press SELECT to confirm.
7.4 Contrast
While the radio is in use (powered on):
Note: High brightness levesl can make it much easier to view playback information.
It can be activated as follows: < Main menu > < System settings > < Contrast >
<Power on> <Low/ Medium/ High.
While the radio is in standby mode:
Above setting procedure also works for standby mode. Setting to a low level is
recommended.
7.5 Factory Reset
1. Factory reset is achieved by pressing: MENU < Main menu > < System settings >
<Factory Reset> Proceed? YES or NO.
2. Turn SELECT to ‘Yes’, then press SELECT to confirm.
A factory reset will reset all user settings to default values. Therefore all time, date, and
network configuration and presets are lost.
The radio’s current software version will be maintained, as is registered with the Frontier
Silicon Internet radio portal.
Internet radio favourites can also be kept unless you re-register your radio with another
account on the Frontier Silicon portal website.
Loading ...
Loading ...
Loading ...