Loading ...
Loading ...
Loading ...
21
Chapter 4 - FM Mode
4.1 General Operation
Press MODE repeatedly until < FM Radio > is displyed.
For initial use, it will start at the beginning of the FM frequency range (87.50MHz).
Otherwise, the last listened FM station will be selected.
Note: or enter < Main menu >, and then
turn
SELECT
to < FM >, press
SELECT
to confirm
.
4.2 Scan Setting
By default, FM scans stop at any available station. This may result in a poor signal-to-noise
ratio (hiss) from weak stations.
To change the scan settings to stop only at stations with good signal strength, press MENU
< Scan setting > Strong stations only? Yes, press SELECT to confirm.
4.3 How to Scan
1.
To manually adjust frequency, while frequency is displayed,turn SELECT to adjust it by
0.05MHz per step, or;
2. To auto-search, while frequency shows up, simply press SELECT.
4.4 Audio Setting
By default, all stereo stations are reproduced in stereo. For weak stations, this may result
in a poor signal-to-noise ratio (hiss).
By selecting FM Mono mode, the level of background noise can be greatly reduced. To
play weak stations in mono mode press MENU < Audio setting > Listen in mono
only? Yes, press SELECT to confirm.
Loading ...
Loading ...
Loading ...