Loading ...
Loading ...
Loading ...
CAUTION:
BesureyourgrillisOFF and coolbeforecleaning.
Take care notto chipor scratchthe painted surfaces
because itwillvoidyour warranty.
Annual Cleaning of The Grill Interior
Burning-offthe grill aftereverycookout will keep it
ready for instant use. However, once a year you should
give the entire grill a thorough cleaning to keep it in top
operating condition. Follow these steps:
1. Turn allburner valvestothe fuUOFF position.
2. Turn the LPG cylinder valveor NGShutoff Valve to
the full OFF position.
3. Detach the LPG regulator assembly or NG hose
assembly from your gas grill.
4. Remove and clean the flame tamers, cooking grids
and grill burners.
5. Cover each gas valveorificewith aluminumfoil.
6. Brushthe inside and bottomofthe grillwith a stiff
wire brush, and washwith a mildsoap andwarm
water solution.Rinsethoroughlyand letdry.
7. Remove aluminumfoil from orificesand check
eachorificefor obstruction.
8. Check each spark electrode,adjustingas needed.
The Electrode tip shouldbe pointingtowardthe
bottomofthe gas collector box and approximately
3/16" from the bottom ofthe collector box.
9. Replace the burnersand adjustthe gas collector
box.The edge ofthe collector box shouldbe
overlappingthe burner port.
10.Replaceflame tamers and the cookinggrids.
11.Reconnectthegas sourceand observethe burner
flamefor correct operation.
Cleaning Exterior Surfaces:
Beforeinitialuse, and periodically thereafter, we
suggestyou wash your grillusinga mildsoap and
warm watersolution.You canuse a washclothor
spongefor thisprocess.Do not use a stiffwireor
brass brushthatmightremove paintdudngthe clean-
ingprocess.
Cleaning Exterior Stainless Steel Surfaces:
Weathering and extreme heat cancause exterior
stainless steelsurfacesto tam tan in color. Follow
these steps for the best cleaning results.
1. Turn theLPG cylinder valve(clockwise) tothefull OFF
position. Disconnect the regulator and hose assem-
blyfrom LPG cylinder. Cover exposed gas fitting with
aluminum foil.
2,
Remove dirtor grease using a softclothand polish
stainless surfacesusing a Stainless Steel Foam
Cleaner.Never useabrasivecleanersorscrub-
bers-they willscratchand damage your stainless
steel.
3. Wipe with a softclothand allowto air dry before
lighting your grill.
WARNING
Do not line the bottom of the grill housing
with aluminum foil, sand or any substance
that will restrict the flow of grease into the
grease draining tray and receptacle.
Failure to comply with these instructions
could result in a fire or explosion which
could cause serious bodily injury, death, or
propertydamage.
18
Loading ...
Loading ...
Loading ...