Loading ...
Loading ...
Loading ...
Installing LATCH or ISOFIX Child Seats
WARNING: Child seat anchorages are
designed only to withstand the loads
imposed by a correctly installed child
safety seat. Under no circumstances
are they to be used for adult seat belts,
harnesses, or attaching other items or
equipment to the vehicle.
WARNING: Never attach two child
safety seats to one anchor point. In
a collision, one anchor point may be
incapable of securing both seats.
WARNING: If the restraint is not
correctly anchored, there is a risk of
serious injury to the child in the event
of a collision or emergency braking.
The outer rear seats are equipped to accept
LATCH/ISOFIX restraints.
Note: Only a seat belt retained child seat can
be used in the center rear seating position.
To install a LATCH/ISOFIX child seat:
1. The lower LATCH/ISOFIX anchorage
points are located between the seat back
rest and rear cushion, indicated by child
seat identification tabs on the seat.
2. Position the child seat on the vehicle
seat.
3. Attach the child seat latches onto
the LATCH/ISOFIX lower anchor points,
following the manufacturer’s instructions
to connect and tighten them.
4. Securely connect and tighten the latches.
To do this, attempt to pull the child seat
away from the vehicle seat and twist
it from side to side. Even if the child
seat appears secure, check the anchor
points visually to make sure for correct
attachment.
If the child seat moves more than 1 inch
(2.5 cm) from side to side or front to
back, it is too loose. If you cannot tighten
the latches any further, try a different
recommended seating location or another
child safety seat.
Seating & Safety Restraints 50
Loading ...
Loading ...
Loading ...