Loading ...
Loading ...
Loading ...
Cross Traffic Protection
WARNING: Cross Traffic Protection
is an assist feature only, and is
not a substitute for attentive driving
and sound judgment. The driver is
responsible for paying attention while
driving, monitoring the surroundings,
and braking or steering the vehicle
when necessary.
WARNING: There are factors that can
reduce or impair the performance of
the Cross Traffic Protection system,
causing either unnecessary, invalid,
inaccurate, or missed warnings. Do not
rely solely on Cross Traffic Protection to
warn you of a potential collision.
WARNING: Cross Traffic Protection
does not detect smaller objects outside
of the range of the sensors. This
could include (but is not limited to)
small children or animals. Be aware of
your surroundings at all times while
operating the vehicle.
WARNING: Cross Traffic Protection
does not provide alerts when the driver
is already applying the brake.
Cross Traffic Protection warns the driver when
there is a risk of collision with crossing traffic
approaching from the left or right to the front
or rear side of the vehicle and will automatically
apply emergency braking if needed.
When enabled, Cross Traffic Protection is
active at speeds below 10 mph (16 km/h) for
warnings, and speeds below 6 mph (10 km/h)
for braking.
Note: Cross Traffic Protection is not available
when the gear is in P (Park). Front cross traffic
alerts or braking will not be issued if vehicle
speed exceeds 10 km/h or driven distance
is over 40m after shifting from P (Park) to
D (Drive) gear.
When the gear is in D (Drive) or N (Neutral)
and forward vehicle motion is detected, Cross
Traffic Protection will sound an alert and
prompt on the Instrument Cluster when a
collision risk is detected.
If the vehicle is moving and the driver does
not react in time, the system will activate
emergency braking.
When the gear is in
R (Reverse) or N (Neutral)
and backward vehicle motion is detected, Cross
Traffic Protection will sound an alert and
prompt on the right Cockpit Panel when a
collision risk is detected.
If the vehicle is moving and the driver does
not react in time, the system will activate
emergency braking.
Cross Traffic Protection settings
WARNING: Lucid strongly recommends
that you do not disable Cross Traffic
Protection when driving. Disabling
this feature deactivates alerts and
emergency braking which increases the
risk of causing or contributing to a
crash.
To configure Cross Traffic Protection, from
the Pilot Panel touch
> DreamDrive,
then press to enable or disable Cross Traffic
Protection. Settings save to the current User
Profile.
Lane Departure Protection
WARNING: Lane Departure Protection
is for guidance purposes only and is
not intended to replace your own direct
visual checks. Never depend on Lane
Departure Protection to inform you of
unintentionally driving outside of the
boundaries of the driving lane or road
edge. Always stay alert, pay attention to
the driving lane and always be aware of
other road users. Failure to do so can
result in serious injury or death.
WARNING: Lane Departure Protection
is designed to detect lane markings
and certain road edges. It is your
responsibility to drive attentively and
stay within the boundaries of the
driving lane.
WARNING: Any changes to the vehicle's
suspension or wheel height may result
in degraded feature performance or no
activation.
Advanced Driver Assistance Systems (ADAS) 108
Loading ...
Loading ...
Loading ...