Loading ...
Loading ...
Loading ...
Disabling the Power System
Safety Precautions
WARNING: In the event of fire,
immediately contact your local fire
emergency responders.
WARNING: ALWAYS ASSUME THAT
HIGH-VOLTAGE COMPONENTS ARE
ENERGIZED. Cutting, crushing, or
touching high-voltage components can
result in serious injury or death.
WARNING: High-voltage cables and
components may remain energized for
up to 2 minutes after disabling.
WARNING: High-voltage batteries can
self-ignite even after extinguishing the
initial fire.
WARNING: The airbags and other
supplemental restraint systems may
remain powered for up to 2 minutes
after disabling.
WARNING: In the event of a fire
involving a charging station, treat it as
an energized electrical fire until power
to the charger is confirmed to shut off.
WARNING: This vehicle does not have
an internal combustion engine. Lack of
engine noise does not mean the vehicle
is OFF. Silent movement capability
exists until the vehicle completely shuts
down.
Emergency Responder Cut Loop
You can locate the emergency responder cut
loop under the hood on the right side, near the
suspension strut tower.
You can determine the location of the cut
loop by the yellow label wrapped around it.
This label is visible even with the maintenance
access panel in place.
Double cutting and removing the emergency
responder cut loop shuts down both the high-
voltage and the 12-volt battery systems.
Note: The cut loop is a low-voltage (12V) cable.
Roadside Assistance & Emergency Information 201
Loading ...
Loading ...
Loading ...