Loading ...
Loading ...
Loading ...
- On the Pilot Panel, select >
ENERGY and press the OPEN
CHARGE PORT button.
- Use the Lucid mobile app.
- With a valid key fob detected within
6.5 feet (2 m) of the unlocked vehicle,
press the bottom of the charge port
door and it will open automatically. The
charge port door automatically closes
after unpluing the charging cable;
otherwise, you can gently push upward
on the bottom of the door until automatic
closing takes over.
CAUTION: If the charge port door has
iced over in cold weather conditions,
DO NOT attempt to break the ice using
blunt force (that is, hitting or chipping
at it with a tool), as this could cause
damage.
Note: If the charge port door has iced
over, Lucid recommends using the in-vehicle
controls or the Lucid mobile app to cycle the
open/close function of the door until the ice
breaks.
Manually opening the door
CAUTION: Manually opening the charge
port door is only recommended in
instances where the vehicle has no
power and the 12V batteries cannot be
charged.
If the vehicle has no power, the charge port
door can be opened manually:
1. Open the driver’s door.
2. Place your finger at the bottom right
corner of the charge port door and gently
lift up.
3. Continue lifting on the corner until a gap
begins to form between the top edge and
the fender.
4. Once there is a gap along the top edge,
insert your fingers into the gap and
gently pull downward until a hard stop is
reached.
Charging the Vehicle
Plug the charging cable into the charge port.
Note: During charging, the battery system’s
heating and cooling functions monitor the
temperature of the battery pack, and will turn
on or off as needed to help maintain an ideal
temperature. Clicking or fan noises are normal.
Errors during charging
If an error occurs, the charge port light turns
red. If this happens, details and instructions
will be displayed on both the Pilot Panel and
the Cockpit Panel.
If following the steps in the displayed
instructions does not resolve the error, contact
Lucid Customer Care for further assistance.
Stopping charging
To stop charging before the process is
completed, press the STOP CHARGING button
on the
ENERGY screen of the Pilot Panel.
You can also stop charging using the Lucid
mobile app.
Disconnecting the Charging Cable
Once charging is completed, unlock the door
doors, press the button on the charging cable,
and pull the charging cable to disconnect it
from the charge port.
High-Voltage Battery Pack & Charging 145
Loading ...
Loading ...
Loading ...