Loading ...
Loading ...
Loading ...
W415-1517 / A / 09.02.16
29
EN
If wall mounting, remove the knock-out and cut out corresponding insulation for routing the probe wire.
Cut away or poke through the insulation
to provide a route for the probe.
Remove the knockout tab.
TAKE CARE WHEN ROUTING THE PROBE WIRE NOT TO DAMAGE OR CUT IT.
Slide collet onto probe.
A
SETTING DEPTH OF PROBE
Set the depth to 3.5" and secure with
set screw.
B
WHEN WALL MOUNTING, IT IS IMPORTANT TO KEEP THE MONITOR AT LEAST 8" AWAY FROM THE
SIDE OF THE UNIT. NEVER INSTALL DIRECTLY ABOVE THE APPLIANCE.
WIRE ROUTING FOR WALL MOUNT
A
B
Loading ...
Loading ...
Loading ...