Loading ...
Loading ...
Loading ...
Be sure to comply with the local, national and international
laws and regulations.
Read "PRECAUTIONS" carefully before installation.
The following precautions include important safety items.
Observe them and never forget.
Keep this manual with the owner's manual in a handy place
for future reference.
Installation must be performed in accordance with the
requirement of NEC and CEC by authorized personnel only.
（Applicable to the North American area only）
1. PRECAUTIONS
The safety precautions listed here are divided into two categories. In
either case, important safety information is listed which must be read
carefully.
After completing the installation, make sure that the unit operates
properly during the start-up operation. Please instruct the customer
on how to operate the unit and keep it maintained.Also, inform
customers that they should store this installation manual along with
the owner's manual for future reference.
Only trained and qualified service personnel should
install, repair or service the equipment.
Improper installation, repair, and maintenance may result in
electric shocks, short-circuit, leaks, fire or other damage to
the equipment.
Failure to observe a warning may result in death.
Failure to observe a caution may result in injury or
damage to the equipment.
Install the unit according to this installation instructions
found in this document.
If installation is defective, it will cause water leakage,
electrical shock or fire.
When installing the unit in a small space, take measures
to prevent refrigerant concentration from exceeding
allowable safety limits in the event of refrigerant leakage.
Contact the place of purchase for more information.
Excessive refrigerant in a closed space can lead to oxygen
deficiency.
Use the attached accessories parts and specified parts
for installation.
Failure to use the included parts will cause the set to fall,
water leakage, electrical shock or fire.
Install the unit in a strong and firm location which is able
to withstand the set' s weight.
If the installation site is not secure or the installation is not
properly done, the set will drop and possibly cause injury or
damage.
The appliance should not be installed in the laundry.
Before obtaining access to terminals, all supply circuits
must be disconnected.
The appliance must be positioned so that the plug is
accessible.
The enclosure of the appliance shall be marked with
words, or with symbols, with the direction of the fluid
flow.
For electrical work, follow the local national wiring
standard, regulations and these installation instructions.
An independent circuit and single outlet must be used.
If electrical circuit capacity is insufficient or a defect exists in
the electrical work, it will cause an electrical shock or a fire.
Connect the specified cable tightly and then clamp the
cable so that no external force can act on the terminal.
If connection or fixing is not correct , it will cause a heat
build-up or fire at the connection.
Wiring routing must be properly arranged so the control
board cover is fixed properly.
If the control board cover is not fixed properly, it will cause a
heat build-up at the connection point of the terminal, which
may result in a fire or an electrical shock.
If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or similarly qualified
person in order to avoid a hazard.
An all-pole disconnection switch with a contact
separation of at least 3mm in all poles should be
connected in the fixed wiring.
When performing the piping connection, make sure that
air substances do not enter the refrigeration cycle.
If air substances enter the refrigeration cycle, it will reduce
capacity, abnormal high pressure in the refrigeration cycle,
explosion and injury.
Do not modify the length of the power supply cord or use
an extension cord, and do not share the single outlet
with other electrical appliances.
Failure to comply will cause fire or electrical shock.
Carry out the specified installation work after taking into
account strong winds, typhoons or earthquakes.
Improper installation work may result in the equipment falling
and causing accidents.
CAUTION
WARNING
WARNING
4
Downloaded from www.ManualsFile.com manuals search engine
Loading ...
Loading ...
Loading ...