Loading ...
Loading ...
Loading ...
,, Check damaged parts. Before further use of the tool, a guard or other
part that is damaged should be carefully checked to determine that it will
operate properly and perform its intended function - check for alignment
of moving parts, binding of moving parts, breakage of parts, mounting, and
any other conditions that may affect its operation. A guard or other part that
is damaged should be properly repaired or replaced.
• Direction of feed: feed work into a blade or cutter only against the direction
of rotation of the blade or cutter.
Never leave a tool running unattended. TURN THE POWER OFF. Don't
leave the tool until it comes to a complete stop.
SPECIFIC SAFETY RULES FOR ROUTER TABLES
For Your Own Safety Read Instruction Manual Before Operating Router Table.
• Wear eye protection.
Feed the workpiece against rotation of cutter.
Do not use awkward hand positions.
= Keep fingers away from revolving cutter = use fixtures when necessary.
Use the overhead guard when the adjustable fence is not in place.
Do not expose the table to rain or use in damp location.
37599 Manual_Revised_12 1219 Page 9
Loading ...
Loading ...
Loading ...