Craftsman 32037599 Operator's Manua_

Loading ...

ADJUSTING THE MITER

GAUGE (Fig. 21)

_, WARNING: Failure to unplug

your router before performing

adjustments to the router or table

could result in accidental starting

causing serious injury.

1 Loosen the miter gauge knob.

2. Rotate the miter gauge to the

desired angle.

3. Tighten the miter gauge knob.

Fig. 21

ADJUSTING THE CUTTING HEIGHT

WARNING: Failure to unplug your router before performing adjustments to

the router or table could result in accidental starting causing serious injury.

Select appropriate holes to adjust the router to the table according to Table 2

and Fig. 5.

NOTICE: A hex wrench is required Fig. 22

for this operation (not included).

1. Unplug the router.

2. Loosen the clamping lever on

the router.

3. Insert the hex wrench into the

adjusting hole on the tabletop

(Fig. 22), and turn the router

adjustment dial with the hex

wrench to move the router

collet down or up.

4. When the desired cutting height

is set, tighten the clamping lever on the router.

37599 Manual_Revised_12 1219 Page 23

Loading ...

Craftsman 32037599 Router Table