Loading ...
Loading ...
Loading ...
A
_L WARNING: Never leave
the router unattended while it is
running or before it comes to a
complete stop.
4. To lock the switch in the OFF
position, push the ON/OFF
switch down to turn the switch
OFF, and remove the safety
key from the switch panel.
Electric receptacles
17
Dust Shield
Two electric receptacles are located
at the back of the switch assembly (Fig. 17). Use one for plugging in the router. The
other may be used to plug in a vacuum or a light (not included). Two dust shields are
designed to protect the receptacles.
,_ WARNING: To ensure safety and reliability, the total current drawn from the
two units must be less than 15 Amps.
NOTICE: The diameter of the vacuum adapter in the fence assembly is 2-1/4 in.
diameter; select the vacuum accordingly.
ADJUSTING THE FENCE
,_ WARNING: Failure to unplug your router before performing adjustments to
the router or table could result in accidental starting causing serious injury.
The fence enables you to support and guide the workpiece.
TO ADJUST THE EXTENDED
FENCE FORWARD AND
BACKWARD (Fig. 18}
WARNING: Failure to unplug
your router before performing
adjustments to the router or table
could result in accidental starting
causing serious injury.
1. Unplug the router.
2. Loosen the two
clamping knobs.
3.
4.
Fig. 18
Move the fence forward or backward along the slots to the desired position, as
shown in Fig. 18. The fence can be moved forward and backward 3-3/4 in.
Tighten the clamping knobs.
37599 Manual_Revised_12 1219 Page 21
Loading ...
Loading ...
Loading ...