Loading ...
Loading ...
Loading ...
ENGLISH
11
Troubleshooting
If you experience a problem with this unit, please check the fol-
lowing items before requesting service. Something other than
this unit could also be the cause of the problem. Please also
check that the connected devices are also being used properly.
If it still does not operate correctly, contact the retailer where
you purchased the unit.
No power.
e Confirm that the AC adapter is plugged into an outlet.
Then, press the STANDBY/ON button to turn the unit on
(page 8).
There is no sound.
e When connecting this unit's analog audio output con-
nectors to the audio input connectors of an amplifier
or other equipment, set the PHONO EQ (audio output
setting) switch to ON (page 8).
Playback is not possible; there is noise.
e Remove the protective cap.
e Fingerprints and dust on a record can cause noise and
the sound to skip. Use a commercially-available record
cleaner to clean records (page 4).
e Clean the stylus (page 7).
e If the stylus is worn-out, replace it (page 7). The lifespan
of a stylus depends on the use conditions, but it is usually
about 300 hours.
e Place the unit as far away as possible from TVs, micro-
wave ovens and other devices that emit electromagnetic
waves.
Noise occurs when a record is playing.
e Noise could occur if the stylus pressure is higher than
cartridge's specified value. Readjust the stylus pressure so
that it is the specified value (page 5).
The pitch is wrong.
e Select the rotation speed indicated on the record (page
8).
The sound is skipping.
e Vibrations will cause skipping. Place this unit in a stable
location.
e Clean the record.
e Do not use scratched records.
e Balance the tone arm and readjust the stylus pressure
(page 5). The stylus and sound might skip if the stylus
pressure is lower than the cartridge's specified value.
Connection is not possible with the Bluetooth speaker I
want to connect.
e Turn both this unit and the Bluetooth device off once. Turn
them both on and try pairing again.
e Turn off the power of other Bluetooth speakers within
10 meters (33 ft). The closest Bluetooth speaker will be
paired.
Connection with the Bluetooth speaker succeeded, but I
cannot hear any playback sound.
e Check the volume of the Bluetooth speaker.
e Press the PAIRING button on this unit for at least six sec-
onds to disconnect the Bluetooth speaker once. Then, try
pairing again.
e Turn this unit off and then on again. Then, press the
PAIRING button to try pairing again.
Connection with the smartphone is not possible.
e This unit functions as a Bluetooth transmitter, and it can
send sound to Bluetooth speakers.
Since it does not function as a Bluetooth receiver, it can-
not be connected to a smartphone.
Specifications
Bluetooth function
Bluetooth version ............................4.0 (DUAL MODE)
Output class ............................................Class 2
Supported profile ........................................ A2DP
Codecs.....................SBC, AAC, Qualcomm® aptX™ audio
Maximum number of stored pairings................. 8 devices
General
AC adapter power
Input......................... AC 100 V – AC 240 V, 50–60 Hz
Output..................................... DC 12 V, 500 mA
Power consumption
Standby.........................................0.5 W or less
On (START)..................................... 1.5 W or less
Weight........................................ 4.9 kg (10 7/8 lb)
Operating temperature range .......................5°C to 35°C
Dimensions (W × H × D) (including protrusions)
When the dust cover is closed
420 × 117 × 356 mm (16 5/8" × 4 5/8" × 14 1/8")
When the dust cover is open
420 × 381 × 402 mm (16 5/8" × 15" × 15 7/8")
When the dust cover is removed
420 × 102 × 356 mm (16 5/8" × 4 1/8" × 14 1/8")
o Performance data is specified at 20°C.
Included items
Felt mat × 1
45 RPM adapter × 1
Counterweight × 1
Headshell × 1
Audio-Technica VM Type (dual magnet) stereo cartridge
(AT95E) preinstalled
Turntable (platter) × 1
Dust cover × 1
Dust cover hinges × 2
RCA audio cable with grounding terminal × 1
AC adapter (GPE053A-V120050) × 1
Owner’s manual (this document) × 1
o Specifications and appearance are subject to change without
notice.
o Weight and dimensions are approximate.
o Illustrations in this owner's manual might differ slightly from
production models.
Turntable (platter)
Drive system ......................................... Belt drive
Motor................................................DC motor
Rotation speed.....................33 1/3 rpm, 45 rpm, 78 rpm
Rotation speed variation ..................................±2%
Wow and flutter...........................................0.2%
SN ratio ...............67 dB or higher (A-weighted, 20 kHz LPF)
Turntable (platter) ...........................Aluminum die-cast
30cm (12") diameter
Tone arm
Arm type...................Static-balanced S-shaped tone arm
Effective arm length.................................. 223 mm
Stylus pressure variation range ........................... 0–5 g
Acceptable cartridge weight ......................... 4.0–8.0 g
Cartridge
Type ....................................VM (equivalent to MM)
Output voltage.......................... 3.5 mV (1 kHz, 5 cm/s)
Stylus pressure ....................................... 2.0 ±0.5 g
Cartridge weight ..................................... 5.7 ±0.5 g
Included headshell weight
10 g (including screws, nuts and wires)
o The lifespan of a stylus depends on the use conditions but
is usually about 300 hours.
o An Audio-Technica AT95E VM Type cartridge is installed in
this unit.
Note: VM type cartridges have the same characteristics as
MM type cartridges.
o Replacement stylus model: Audio-Technica ATN95E
Output voltage
PHONO EQ THRU..................3.5 mV (1 kHz, 5 cm/s) ±3 dB
PHONO EQ ON.............................. 155 mV (−16 dBV)
Output connectors........................................ RCA
USB port
USB port that can receive power from computer USB buses
(Full Speed) ..............................USB connector type B
USB bus power support ............................ 5 V, 500 mA
Sampling frequency
8 kHz, 11.025 kHz, 16 kHz, 22.05 kHz, 32 kHz, 44.1 kHz, 48 kHz
Quantization bit depth ...................................16-bit
Loading ...
Loading ...
Loading ...