Loading ...
Loading ...
Loading ...
10
Listening with Bluetooth® speakers
This unit has a Bluetooth transmitter that can send sound to
Bluetooth speakers wirelessly.
1 Press the STANDBY/ON button on the
back of the unit to turn it on.
2 Pair and connect the Bluetooth speakers.
PAIRING button
Pairing lamp
Pairing Bluetooth speakers
Pairing this unit with another Bluetooth device is nec-
essary the first time you connect with that Bluetooth
device.
Press the PAIRING button on this unit to start connec-
tion mode. The pairing lamp will blink slowly. Press the
PAIRING button again for at least two seconds to start
pairing mode. The pairing lamp (white) will blink rapidly.
After this unit enters pairing mode, put the Bluetooth
speaker into pairing mode.
When this unit and the Bluetooth speaker are connected,
the pairing lamp will stay lit without blinking.
o Refer to the operation manual of the Bluetooth
speaker for information about how to use it.
o Pairing might take some time depending on the
connected device.
o This unit will connect to the closest Bluetooth
speaker. If no Bluetooth speaker is found for five
minutes, Bluetooth standby mode will begin and the
pairing lamp will become unlit.
Connecting already paired Bluetooth speakers
Press the PAIRING button on this unit to start connection
mode. The pairing lamp will blink slowly.
Make the Bluetooth speaker ready to connect.
When this unit and the Bluetooth speaker are connected,
the pairing lamp will stay lit without blinking.
o When connecting to a Bluetooth speaker, move
other Bluetooth speakers and receiving devices at
least 10 meters (33 ft.) away from this unit or turn
them off.
3 Play a record.
o Bluetooth connection is also possible while a record
is playing.
o Adjust the Bluetooth speaker volume if necessary.
o This unit cannot be used to adjust the volume.
o To end a connection, press the PAIRING button on
this unit for at least six seconds to enter Bluetooth
standby mode or turn this unit off.
o Pressing the PAIRING button for 10 or more seconds
will cause the pairing lamp to blink and clear all exist-
ing pairings with other devices.
3 Press this unit’s STANDBY/ON button to
turn it on.
The computer will automatically detect this unit's USB
port and identify the unit as “USB Audio CODEC”.
o To record audio from this record player using a computer,
you must first install software that can be used for audio
recording on the computer.
You may purchase the audio recording software that
you prefer separately or download free software, such
as Audacity (http://www.audacityteam.org/), from the
Internet.
As free software, Audacity is not supported by TEAC.
o When recording with a computer, do not do any of the fol-
lowing. Doing so could cause the computer to malfunction.
Always quit the computer recording software before doing
the following.
u Disconnect the USB cable
u Put the unit into standby
Computer settings
The following example explains the settings to make using
Windows 7.
1 From the Start menu, select Control
Panel.
2 Click “Sound”.
3 Click the “Recording” tab, and confirm
that “USB Audio CODEC” is set as the
“Default Device”.
4 Select “Microphone USB Audio CODEC”,
and click the Properties button.
5 Click the “Advanced” tab.
6 From the “Default Format” pull-down
menu list, select the desired recording
quality (format).
TIP
To record at the highest audio quality that this unit can
output, select “2 channel, 16 bit, 48000 Hz”.
Lowering the sampling frequency setting value will rela-
tively reduce the size of files but also decrease the audio
quality.
7 Click “OK”.
Recording with a computer (continued)
Loading ...
Loading ...
Loading ...