Loading ...
Loading ...
Loading ...
122
SetupSetup
6. Hardware
Bluetooth Wakeup (Default Value: Off)
This function wakes up the unit on standby by connecting a BLUETOOTH
enabled device.
On When this function is used
• When this function is set to "On", the power consumption
in standby state increases, however, the increase in power
consumption is minimized by automatically entering the
Hybrid Standby mode where only the essential circuits
operate.
Off When this function is not used
• This setting is xed to "Off" if "Bluetooth" -"Bluetooth
Receiver" is set to "Off".
• This setting is also xed to "Off" if "Bluetooth" - "Bluetooth
Receiver" - "Auto Input Change" is set to "Off".
• Wait for a while if "Network Standby" and "Bluetooth Wakeup" cannot be
selected. It can be selected when the network function is activated.
5. 12V Trigger A
Set when outputting the control signal (maximum 12 V/100 mA) through the 12V
TRIGGER OUT A jack. Different settings can be set for each input selector. You
can enable power link operation when you connect the unit and the external
devices equipped with 12V trigger input jack.
Delay (Default Value: 0sec)
Set after how many seconds the 12V trigger output will occur in response to
the unit's operation. As some devices cause a large current when they turn on,
delay the output if such devices are connected. Select a value between "0 sec"
to "3 sec".
BD/DVD (Default Value: Main)
GAME (Default Value: Main)
CBL/SAT (Default Value: Main)
PC (Default Value: Main)
STRM BOX (Default Value: Main)
AUX (Default Value: Main)
CD (Default Value: Main)
TV (Default Value: Main)
PHONO (Default Value: Main)
TUNER (Default Value: Main)
NET (Default Value: Main)
BLUETOOTH (Default Value: Main)
Set the 12V trigger output setting to each input.
Off
When the control signal is not output
Main
When controlling the power of external devices linked to the
input selection in the main room
Zone 2
When controlling the power of external devices linked to the
input selection in ZONE 2
Main/Zone 2
When controlling the power of external devices linked to the
input selection in the main room or in ZONE 2
Loading ...
Loading ...
Loading ...