Loading ...
Loading ...
Loading ...
Installation - Four Essential Requirements
4, Ventilation and InstaUlation
To ensure adequate ventilation for your refrigerator or freezer, allow a minimum of 2" (50ram) of
airspace above tile cabinet, s4"(20mm) on each side, and 11/s"(30mm) at tile rear. (See diagram 1).
The appliance is intended to be placed against a wall with a free distance not exceeding
3"(75mm),
If building the appliance into a cupboard, follow installation instructions provided with the
Ensure the front face of the bench is aligned to the front corner edge of the refrigerator door, This
will allow the door to fully open, (See diagram 2).
If placing the refrigerator in a corner allow 5 _/2"(140mm) clearance for the door to be able to
open, (See diagram 3),
i)}ag ar_ ]
Dagra p
N:
Diagram 3
Before Placing Food in the Fresh Food or Freezer Compartments
Remove all packaging. Ensure that all t/ansit clips ate removed from the refdgeratoh These are
small rubber stops located at the back of the shelves.
Allow the refrigerator and freezer to run empty for 2 _ hours to allow each compartment to con
to the appropriate temperature.
Clean the insi(Je of the appliance with warm water and a Iktle liquid detergent to remove
manufacturing and transportation dust
The appliance may have an odor on its initial operation, but this w@ go when the refrigerator and
freezer have cooled sufficiently.
Energy Efficiency
Do not cover your appliances with any material that will prevent air from flowing around the
cabinet sides.
Do not leave the door open for any longer than is necessary.
Allow good clearances in front of the air ducts within the cabinet for maximum cold
air distribution.
Loading ...
Loading ...
Loading ...