Loading ...
Loading ...
Loading ...
FIGURE 50
SCRE
FIGURE 51
WASHER
HUB
CAP
KLIP RING
"_=TIRE CARE
a. Maintain tire pressure in front at 14 PSI and rear tires
at 12 PSI
b. Keep tires free of gasoline, oil, or insect control chemi-
cals which can destroy rubber,
c Avoid stumps, stones, deep ruts and other hazards that
may causetire damage.
d, Removing front wheel for tire repair (Fig. 50)_
--- Block up front axle securely,
-- Remove Hub Cap, Klip Ring and Washer to allow
wheel removal
*- Repair tire and reassemble, Replace Washer and snap
Kllp Ring securely in axle groove Replace Hub Cap
e, Removing rear wheel for tire repair.
-- Block up rear axle securely
-- Remove Hub Cap, Klip Ring and Washers
-- Repair tire and reassemble. Replace Tire, Washers,
Klip Ring and Hub Cap.
7_
S,
WHEN MOUNTING TIRES, UNLESS I
BEADS ARE SEATED, OVERINFLATION
CAN CAUSE A FATAL EXPLOSION.
FINISH
Keep tractor finish and seat free of gasoline, oil_ insect
chemicals or battery electrolyte Protect painted surfaces
with automotive type wax
HOOD REMOVAL
a Lift Hood Disconnect Headlight Wiring Connection
(Fig. 52)
b Unscrew one Screw at rear of each Side Panel (Fig,
51)
c Pivot Hood and Side Panel forward and lift off tractor
(Fig. 52)
d To replace, reverse the above procedure.
WIRE
CONNECTION
FIGURE 52
- 20 -
Loading ...
Loading ...